Toyota Tundra Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 27 Results
  1. Lighting & General Electrical
    Hey, so I just bought my 2006 tundra and while driving noticed that my dash lights, clock light, and running lights were flashing and I can hear a clicking noise from what sounds like the fuse box under the dash. Anyone have any thoughts on what would cause this? Truck runs perfect so no effect...
  2. Lighting & General Electrical
    Going to start by checking fuses. Is it normal for these three items to just fail simultaneously? My cruise control works when i set. The resume function which is up on the lever does not. My brights work if I pull back on the lever but the on position does not turn them on. I have a...
  3. Lighting & General Electrical
    Long time member and reader, but little to no posting, as I do often search and find what I need so I don't have to bug anyone... but this one has me stumped and I just can't find the answer in any old threads for the life of me. I recently changed out my instrument lights to red LEDs in my...
  4. 1Gen-Sequoia
    Hi All, Looking to upgrade my corner lights. What are the Bulb #'s? There must be LED replacements right? What did you use? Thanks in advance!
  5. 2Gen-Audio & Electronics
    i have a 2008 tundra crewmax with factory tow package all the lights and signals and break lights work fine, however i am not getting any power to the left turn signal for the trailer plugs at the hitch. Note: trialer lights all work fine on another truck, when connected to the tundra in...
  6. Lighting & General Electrical
    Anyone know if there is footwell lights on both sides of truck? Passenger and driver? I've only found one on the drivers side. Also how to change the glove box light?
  7. Lighting & General Electrical
    I recently purchased a smoked out LED third brake light for my 06 tundra dc. I cannot figure out any way in this world to get it installed. From the little research that I could find on this topic, I gathered that I needed to drop my headliner and unscrew the 10mm bolts in there to get the stock...
  8. 1Gen-Tundra
    I have a 2002 Limited Access Cab... ...that I installed some Philips LED Daytime Running Lights on. I figured it would be a stylish way to make an older truck look new(er) and add some safety factor in terms of visibility. (See here for product info: Amazon.com: Philips 12824WLEDX1 DayLight...
  9. 2Gen-Member Mods, Write-ups, Build Threads
    Just installed LEDs. Quick and easy. Gonna post some pics. I'm new here so learning how to navigate but I feel I have to share since I got the idea from this site here: http://www.tundrasolutions.com/forums/tundra/171790-diy-led-puddle-lights/ My pics will be similar for my 2011 Tundra CrewMax...
  10. 2Gen-Tundra
    Hello all I have a 2011 DC 5.7 Tundra. The problem I seem to be experiencing is my running lights on the driver's side, rear are not lit. This is the single bulb on the rear tail light. I have tried a new bulb and I have exchanged it with the working bulb on the passenger's side. Both...
  11. 2Gen-Tundra
    I currently own an '07 Toyota Tundra LMT DC- unfortunately hitting a Semi wasn't my best move with the truck, but I left the accident without a scratch or pain on me. Luckily with about 18K in damage it wasn't totaled (somehow). I am currently rebuilding the truck to its former greatness. I am...
  12. 1Gen-Sequoia
    Hey everyone, I just picked up an 05 Sequoia SR5 4x2 with 120k on the clock and had a few questions. To my knowledge, it hasn't had the 90k service so I know it needs a timing belt and water pump change which I plan to do. What else should I do? Is there anything else I should be aware of or...
  13. 1Gen-Sequoia
    So, while at SEMA last year, came across the Warrior Products booth (primarily Jeep parts) and poked around. Found these 2-inch LED backup lights - I liked the look and the inclusion of the grommets, which I figured would make for a super clean install. Warrior Products 2910 - Warrior Products...
  14. 1Gen-Sequoia
    I have a strange issue.. I've checked the fuses but I can't find one blown.. Here is my senario. None of the three ceiling dome lights work (whether they are on Door or ON setting) The timed lights that are usually underneath the console in the front aren't working The lights in the doors of...
  15. 2Gen-Tundra
    I wanted to add some halo's/HID's to my truck. I am looking at oracle headlights but not sure if i should get them. After looking around it seems that all that is included is the halo and it snaps onto the stock headlight. I do not want the stock bulb, I was hoping to get the halos round the...
  16. 2Gen-Tundra
    2010 dc Im trying to add foot well LEDs. The leds would be controlled by the oem dome light rocker switch located on dash panel. Ive been searching the internet about subject, but cant find anything using the oem rocker switch. I looked at the rocker switch and checked continuity on pins...
  17. 2Gen-Tundra
    Hey guys, Few things. I have been a member on here for awhile now but havnt had the chance to post. I have the same user name over to tundratalk. Seems as if i cant get any help or any questions answered over there so i figured i would try this out First let me introduce myself! Live in good...
  18. 2Gen-Tundra
    I've been doing some research on LED tail lights for my 10 Tundra. I've come across some websites that say their tail lights only fit 07-09 Tundras. Also, I heard of a guy who ordered tail light covers for his 2010 Tundra, but they didn't fit. He later found out that they fit 07-09. Does...
  19. 2Gen-Tundra
    Ok, I did a doofus move. Dont have a few drinks, talk on the phone and try to change out your dome, map, and door lights all at the same time. I blew my fuse. anyone know if that fuse for the lights are in the cab fuse box or under the hood? Thanks, Will
  20. 2Gen-Tundra
    So the lights went out inside my 03 tundra. Both the AC panel as well as the main panel but just the back light not the warning or the shifter lights. I talked with my local mechanic and he told me change the light bulbs I did that most were burnt out. I checked my fuses and still have...
1-20 of 27 Results
Top