Toyota Tundra Forums banner

repair

  1. Don't judge me but...

    1Gen-Member Mods, Build Threads, Write-ups
    I finally changed my timing belt and water pump after driving my 03 Tundra 222,887 miles. I meant to change it sooner but just never could find the time or money. So while doing the repair, I broke two rusted bolts on the fan shroud, one rusted bolt on the skid plate, and the clip bolt for the...
  2. 2007 Bed Rust Repair

    Tundra
    Hello fellow Tundra owners. This is my first post so I am not really sure what I am doing. I recently purchased a 2007 Limited 5.7L 4x4 and poorly negotiated after pointing out the orange showing through the spray on bed liner. After reading up online, I figured I'd better get in there and halt...
  3. RENT-A-CAR Specs for Tundra Body Parts???

    Tundra
    Looking at prices to replace the left rear panel and teh bumper on my 2010 SR5 v8 and noticed the prices are about ~$350 for each, but there is a version of teh panel and bumber which are for the RENT-A-CAR SPECIFICATION PACKAGE B which is about ~$550. Anyone know what that is? I have a body...
  4. Door lock Broken!

    1Gen-Tundra
    Hello everyone, I have a 2002 tundra SR5 V-8 4wd and I CAN NOT open my driver side door key wont work power lock wont unlock it. Nothing. I cant get the door panel off because the door just wont open. I was hoping someone can tell me how I can go about fixing it. I have had no luck getting to...
  5. Loose Sway Bar?

    1Gen-Tundra
    Hey all! New here, with an '04 (Tundra) Double Cab, 4x4, AT - SR5 (pretty sure they all were, but whatever). Bought the vehicle from a stealership because I kinda needed 4x4, and it runs and drives great on a smooth road, but once I get into any bumpy or soft terrain, I notice a clunking...
  6. 2005 Sequoia 4wd Transfer Case Acuator ---- need help !

    1Gen-Sequoia
    05 Sequoia 4wd Transfer Case Actuator ---- need help ! HELP..... My 2005 Sequoia was having the symptoms many have reported with trouble going into 4WD LOW. 4WD HIGH shift was working fine but the shift to 4WD LOW would never complete. The 4WD LOW light continues to flash and there was a...
  7. Super White - Paint Repair Question - Need Your Help

    Tundra
    All,So long story short, my wife drove my truck to work today and was not used to driving something so big (she drives a Mustang) and ended up somehow nailing the corner of her office building. The building is fine, in case you are wondering, but my truck is not. See below.As I understand it...
  8. Help?!!! Nasty dent

    1Gen-Tundra
    only ugly spot on my truck. nasty dent on the rear quarter of my passenger bedside, right by the bumper. I've tried hitting it with my hand, pry-bar, hammer w/ block of wood. to big for bondo any ideas?
  9. Repair / replacing side rail or bed rail

    Tacoma
    I nearly tore out the side rail of my DC long bed taco the other day when the top of my Yakima rack hit the top of my office garage while ascending a ramp between floors. Luckily, the only thing damaged on my taco was the side railing that the bed cleats attach to. The plastic bed rail cap...
  10. Starter point replacement V8 1st Gen Tundra

    1Gen-Tundra
    Unless I missed it, I don't think anyone has posted a how-to on replacing the starter points on the 1st Gen Tundra V8. So, I thought I'd take a shot at making my own how-to. The first thing I'd say about this guide is that it could be better. If someone wants to add something that would make it...
  11. Needing advice on repairing a side mirror

    1Gen-Tundra
    Well today my grandparents took the Tundra out to run some errands and when they got back I discovered that they had apparently backed around into a pole of some sorts. :cry: It has moderate side damage to the passenger side, but my main goal right now is that for some reason they handed me...
  12. sway bar link replacement

    1Gen-Tundra
    i have a bone stock 04 tundra with 50k miles. the passenger side sway bar link broke? whats up with that? anyway...looks like an easy replacement, but i didnt know if i needed to jack up the truck or if it could be installed while on the ground? just wanted to get some input before i got into...
  13. Ouch! Hyperextended Joint (aka: wife backed out of garage with door open)

    1Gen-Sequoia
    Actually, the battery died because one of the kids left a door open yesterday. I had a project on the other side of the garage so she was pushing it out to jump it with our other car. I was inside the house, none the wiser until one of my kids came running in and said, "Dad, don't be mad, but...
  14. FIX or FORGET IT (poll)

    Camry
    So do I fix it or just forget about it? I plan on selling my '99 Camry XLE 240,000 miles(I'm the 2nd owner), and it is an overall fair/average condition. Engine and tranny runs great, tires are VG but the premium rims look a bit less than in premium shape. It has newer brakes and roters, the...
  15. Restoring/Repairing 1995 Tacoma

    1Gen-Tacoma
    I recently bought my dad's 1995 Tacoma SX 2.4L, which has been in 2 collisions (and is still running!). That truck needs some mechanical and body work (will post pictures later) and I will need some help with specific parts. I will be replacing the timing chain which I already bought, and need...
Top