Toyota Tundra Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. Lifting
    I have an '03 Access Cab. I did the 2.5" Bilstein 5100 level that a lot of other members do. I installed the Camburg UCAs. I put on BF Goodrich All-Terrain KO2 285/70/17. I still get typical rubbing. I rub the frame at full lock and the edge of the front bumper if i turn in reverse. I bought...
  2. Tire, Wheel, and Alignment
    im considering going with the "rubicon" tire. I have a few pm's with a member on here that has provided awesome info but his setup isnt exactly the same as mine. i will be lifted 2-2.5" in front via 5100s and the rear will be lifted 1.5" via a toytec addaleaf (deaver single leaf). everything...
  3. 1Gen-Tundra
    Been a long time lurker but I finally have a question that I can not seem to find the answer to anywhere within these forums!!! I have a 2005 double cab limited edition with the 20" Enkei Deep Six wheels with a 2.5" tuff country lift kit. I want to get bigger tires and I am shooting for 33's...
  4. 2Gen-Tundra
    I have a RCLB with a 6" rough country lift and 35" toyo mt's. I've always wanted the super agressive deep lip look of the low offset fuels, but I'm worried if I'll be even able to turn the steering wheel without rubbing. Can anyone reccomend any solution to the rubbing? I really like the 20x12...
  5. New Member Introductions
    Hello everyone, I had a couple questions in regards to my 2007 4x4 Tundra.....I have done alot of research and I really want to put a 3/1 leveling kit on my truck and put some 35x12.5x18 Federal Couragia MT tires with a set of 18x9 XD Monster wheels. I was wondering if anyone has any pics of...
  6. 1Gen-Tundra
    I installed Bilstein Ride-height Adjustables on my 2000 Tundra this past week, which theoretically gave me 2.5 inches of clearance. But now, my 285/75/r16 BFG A/Ts (16x8 rims) are scrubbing. I expected a little, but here is my dilemma: The left front tire only scrubs when the truck is turning...
  7. 2Gen-Tundra
    Is anybody running a 305/50R20 AT on a 20x9 +30 wheel on a stock truck with no lift? If so pictures please! Also, are there any rubbing problems running this setup? Flaps? UCAs? Body mounts? Etc. Thanks!
  8. Suspension & Axle
    Tie rod grinding on Coilovers (SAW & Camburg) Please help. I have a 2011 Rock Warrior. I have Camburg UCR's and SAW coilovers. They have about 300 miles on them and were aligned by a place Camburg recommended. It looks like the outer tie rod is rubbing against the lower coil when the steering...
  9. 1Gen-Tundra
    Hey Guys, First post on here for me. So...I have a 02' Tundra and a few years ago I installed coil spacers that are about 2'". As I have found on the forums that was not the best decision and my ball joints hit the springs and are now toast. I also have 1" blocks in the back so the truck sits...
  10. 1Gen-Tundra
    I was wondering if I could get some input on whether it is possible to put 285/75/16 tires on stock wheels with a king lift on a 05 SR5 4x4 without encountering the dreaded rub factor?
  11. 2Gen-Tundra
    I was wondering if I could get some input on whether it is possible to put 285/75/16 tires on stock wheels with a king lift on a 06 SR5 double cab 4x4 without encountering the dreaded rub factor?
1-11 of 11 Results