Toyota Tundra Forums banner

spacers

  1. Another Tire Rubbing Post

    Lifting
    I have an '03 Access Cab. I did the 2.5" Bilstein 5100 level that a lot of other members do. I installed the Camburg UCAs. I put on BF Goodrich All-Terrain KO2 285/70/17. I still get typical rubbing. I rub the frame at full lock and the edge of the front bumper if i turn in reverse. I bought...
  2. Wheel Spacers

    1Gen-Tundra
    I know I will probably be hated by a majority of truck owners for even creating this thread but i was curious i i just got some new BFGoodrich 285 75 r16 on the stock limited rims they fit almost perfectly in the fenders with the 3" block lift i have but the tires are not flush to the fenders...
  3. 2nd Gen Tundra : TRD wheels with BFG TA KO's 275/70/18?? ANYONE with pics?

    Tundra
    I am looking for pics of stock and or leveled Tundras with the standard TRD wheels with BFG's - 275/70/18's. Currently have 'bike tires.." 255 70/18 and I think look ridiculous on these trucks! Im really trying to decide what level on kit for the front end as well as wheel spacers as well...I...
  4. 5100s, spacers and terra grapplers for beefier stock look on CM TRD

    Tundra
    I have a 2010 2wd CM TRD. The truck primarily sees city and highway miles with some light beach and field duty. My goal is to give the truck a beefier look and my current strategy is to put 5100s up front only, 1.5 hub centric spacers all around, and replace stock 275s with 285/65/18 Terra...
  5. HELP! Is it time to replace my Coil Springs?

    1Gen-Tundra
    So, after getting much helpfull advice on how to fix the problem of my coil springs rubbing on my balljoints I have decided to buy new Camburg UCA's and put Bilstein adjustable struts in the front and Bilstein 5100's in the rear with my 1" blocks (taking out my spacers and shooting the F*****s...
  6. spacers for minor rub with 285X75's

    1Gen-Tundra
    I have a 2001 Tundra TRD Off road 2WD with stock rims. I put 285x75/R16s and have a minor inside rub with the frame on full wheel turn. Has anyone encountered this and come up with a cheap, safe solution?
Top