Toyota Tundra Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 32 Results
  1. 1Gen-Tundra
    Hello, amateur mechanic here, I bought a 2000 Tundra with a broken timing belt as a "project" car to work on hoping to maybe fix it and learn something in the process. I am aware the engine may be fragged and require a head rebuild but want to try this first. I have scoped the cylinders and...
  2. 1Gen-Member Mods, Build Threads, Write-ups
    I've been having a stutter from the engine while idling in gear and have replaced plugs & coils to no avail. I did some research and have come to the conclusion that my timing belt could have slipped. I would think this to be unlikely but I am approaching 250k miles and to my knowledge the...
  3. 1Gen-Tundra
    Hey guys, I wanted to get your input on a timing belt/water pump receipt I found from a list of receipts the P.O (No longer have contact with him). (From what I know, maintenance was kept up with). Do any of you out there who have had timing/belt water pump jobs done by the dealer have work...
  4. Engine, Intake, Exhaust, Induction
    I am about purchase a 06 DC and the used car dealer stated that they replaced the timing belt but I want don't have a lot of confidence in their answer. Any suggestions on what I can look for that would support that they actually replaced the timing belt without disassembling everything as if I...
  5. 1Gen-Tundra
    First post here, I have a 2000 LC with a 4.7 engine that is similar to first gen tundra. Curious if anyone here has replaced their fan bracket pulley bearing? Through my research I have found that it is good practice to replace this bearing during a timing belt job. I have found many that have...
  6. 1Gen-Tundra
    I hope somebody can answer my question. I am in the process of replacing my timing belt on my 2000 Tundra. I purchased the kit and replaced the belt, water pump, tensioners etc. I made sure all my timing marks lined up on the block and the replacement belt. I am watching the video that A1 Auto...
  7. 1Gen-Member Mods, Build Threads, Write-ups
    I finally changed my timing belt and water pump after driving my 03 Tundra 222,887 miles. I meant to change it sooner but just never could find the time or money. So while doing the repair, I broke two rusted bolts on the fan shroud, one rusted bolt on the skid plate, and the clip bolt for the...
  8. 1Gen-Tundra
    Hi, First, thank you for any advice or help. Second, I have an 03 V6 Tundra, manual, with 155k miles on it. I handle easy stuff, oil, brakes, spark plugs, ect. but know there are many things I'm not suited for. I've had the truck for about 40k miles with no issues. I got from my brother in...
  9. 1Gen-Sequoia
    Guys, I could use a little input here. I have an '06 Sequoia 4x4 with 151K on it. I want to do the timing belt and water pump as I plan on keeping her for awhile yet. Local dealer (where I bought the thing brand new in 2006) wants over $1,100 to do the job. Probably more after they sell me a...
  10. Engine, Intake, Exhaust, Induction
    So, let's get the story first as I'm not sure what happened. The truck, 2003 Toyota Tundra with a 3.4L paired to an automatic transmission. The truck has nearly 230,000 miles on it and my father in-law has owned it since it was new. He's replaced the timing belt once (at 110,000 miles in...
  11. 1Gen-Sequoia
    All right ladies and gents, I searched for this and couldn't find anything, so any insight is very much appreciated. I have a 2004 Toyota Sequoia with 108,000 that I have no record of a timing belt ever being replaced. I called my local Toyota dealer and they want over $1,000 to do the job...
  12. 1Gen-Tundra
    Hello all- New to this forum stuff but from what I can see this is where I need to be. My question is quite simple. I have a 2003 SR5 TUNDRA with the 4.7 V8 with 98k miles. I'd like to replace the timing belt, H20 pump, and the shocks/struts. What are the most economical kits / parts to...
  13. 2Gen-Tundra
    Hello all- New to this forum stuff but from what I can see this is where I need to be. My question is quite simple. I have a 2003 SR5 TUNDRA with the 4.7 V8 with 98k miles. I'd like to replace the timing belt, H20 pump, and the shocks/struts. What are the most economical kits / parts to buy for...
  14. Engine & Drivetrain
    Recently replaced the timing belt and associated parts and noticed the passenger cam seal had a small leak. I was unable to get a new cam seal or the valve cover gasket (cyl head cover according to the diagram) locally other than 3 day special order. Needed the truck back up on the road and...
  15. 2Gen-Tundra
    I am about to replace the timing belt on a tundra 2006, it has 120K miles, never done anything like this before, but i think I can handle it. Should I have the crank pulley on the ATDC or should I have it at TDC? I've seen videos on youtube that say to put it on ATDC so that no gears need to be...
  16. 1Gen-Sequoia
    while unpluging the cam sensor connector from the wiring harness, the lock broke off on the wiring harness side. is there any way to fix it?
  17. 1Gen-Tundra
    I did my timing belt today on my 06 DC. Everything went smooth. Double checked all the alignment marks, did a 720 degree rotate by hand check, finished installing everything and went to start it and NOT ! It just sputters for a few seconds then dies. Checked the codes and it'll like my...
  18. 1Gen-Tundra
    Morning! Looking to replace the timing belt, water pump and everything else necessary with a timing belt job on my 02' Tundra. I've done a bit of research and there are many many options for timing belt kits and the prices range drastically. Anyone have experience with a specific kit or specific...
  19. 1Gen-Tundra
    As promised, here are my trials and tribulations from the 90k service on my 2005 4.7L V8 Access Cab with 92,000 miles. Cost: approx. $450 Time Spent: 12 hours After thoroughly researching timing belt/water pump replacement "How To's" I purchased a timing belt kit from volkstoy on ebay for...
1-19 of 32 Results
Top