Toyota Tundra Forums banner

wiring

  1. 2Gen-Tundra
    Hello everyone, I am rather new to this forum but I am here in hope of a solution to a tundra problem I have had for about two years now. In the summer of we purchased a wrecked 2012 tundra with the goal of attaching a 1978 ford F250 cab to the floor pan. The tundra ran and drove at the time...
  2. Lighting & General Electrical
    Does anyone know which wires are for the lock and unlock function? I bought an aftermarket keyless entry system and need to tie in.
  3. Lighting & General Electrical
    Just got some power seats from a '02 tundra from wrecking yard ($250). Cleaned them up and bolted them right in. Since the wiring harness was factory installed I figured this should be "plug N Play" right!! Well, the wiring harness connected with no issues. But the seats are not moving.. 1) I...
  4. 1Gen-Tundra
    I have these OEM wiring harnesses underneath my Tundra. I've already connected the larger one to a CURT 55378 4-pole wiring kit, which works great. Now need a 7-way. Can anyone recognize the 5-pin here? What part would it connect to? Is there any chance this plus the other one combine to...
  5. Engine, Intake, Exhaust, Induction
    Howdy. Working on a 2001 Tundra Access Cab 2WD with 4.7 engine and 145,000 miles. Truck began to hesitate and performance slowly degenerated over a month's time. Finally, it quit altogether and woukd crank but not start. It appearsto be a fuel pump circuit problem because, when pump is connected...
  6. 1Gen-Tundra
    *Could post this in the electronics sub, but its basically dead *All the search results weren't for 1st gen Tundras or were very old I'm in search of a remote start for my 2000 Tundra. It's about to start getting cold and I'm having shoulder surgery in a few weeks and would rather my truck be...
  7. Lighting & General Electrical
    I recently purchased a 2002 Limited, which I believe came with the tow package. It has a hitch, which with a 4-pin adapter mounted to underside of the hitch When I hooked a trailer up to it, no lights and voltmeter indicated no voltage. I traced the 4-pin adapter to a harness, just behind the...
  8. Electrical & Computer Systems
    I know there are several threads but they were old so I'm trying to get visibility. I just bought a 2007 Tundra. It's the SR5 without Fog Lights. I bought a Spyder Fog Light kit from CarID. The kit came with a wiring harness designed for a Tundra without the pre-wire. Mine has the pre-wire...
  9. 2Gen-Tundra
    I have a 2011 Tundra Limited with 57,000 miles on it. Not long ago the horn stopped working. At least it stopped working most of the time. It seems that it will work when the wheels are turned fairly hard right or left. After reading some online posts it seems that the likely culprit is the...
  10. Electrical & Computer Systems
    Alright folks..i already feel like an idiot but I need some help here. I tore out the entire glove box assembly (top and bottom) on my 2012 Crewmax desperately to find and fix the maddening chattering sound coming from my blower motor. I succeeded in finding and fixing the problem but during the...
  11. 4Runner
    All, We left for Vegas on a Monday and returned on a Saturday... My wife's 2014 4Runner we've had for just over a year (I posted pics of it around Dec 2013) was parked in the driveway in our nice quiet neighborhood for the time we were enjoying our impromptu vacation... The Monday morning after...
  12. 2Gen-Audio & Electronics
    I just snapped this picture from under my 2007 Tundra 5.7l Long bed. This connector is on the passenger side of the spare tire, near the rear bumper. (http://i.imgur.com/9FbnD5U.jpg) Does this mean I can jut plug and play an OEM backup camera kit?
  13. 2Gen-Tundra
    Hi guys I have 2007 Tundra without trd package, which means no transmission oil temp gauge. Tundra gauge cluster with required gauge cost around 250-300. I want to connect nismo transmission oil temp gauge without installing its Sensor. Is it possible ? If it is, then can anyone tell me the...
  14. 2Gen-Tundra
    I just got the iPad mini, mainly for the reason of using it as a head unit. I have read extensively on this subject, and understand how much better the sound quality would be if I got rid of the OEM radio and used an Audison Bit One, or another digital sound processor. I just don't want to pour...
  15. Electrical & Computer Systems
    I am looking at some after market fog lights that were installed on my truck incorrectly. I have looked at the wiring harness and it is intact. When I check for voltage at the location where the fog light relay is located, I have 12 VDC on the + trigger and - battery (with the switch on), but...
  16. 1Gen-Sequoia
    I want to install a backup beeper on my 2001 Toyota Sequoia. Anyone know where I can get to the wire that goes to the backup lights? I tried pulling out the rear light assembly, but it's wired tight and enclosed so it's hard to get to the wires. Anyone know of a convenient point where I can...
  17. 1Gen-Tundra
    Hi! I am wondering if anyone has access to information that could tell me how to identify (coloring and under-hood and/or under-dashboard) power wire (positive or negative) that is after the computer. (The location of the fuel pump would help as well) I would like to do what I have done with...
  18. 2Gen-Tundra
    2008 Crewmax. I have a flip down monitor coming in the mail to replace the sunglass area. Two questions: Does anyone have a picture of what the rear camera plug n play plug looks like and where, approximatly, I can find it. Can this camera (or one similar) be wired into the wiring in the...
  19. 1Gen-Tundra
    Why would my sound go out on my after market radio when the headlights are turned on?
  20. 1Gen-Tundra
    I ripped the wires off the harness for my alternator when I was removing it. I need to know which color wire goes to which pin in the harness. I have a 2000 tundra 4.7L. Pins are marked on the harness 1 2 3. 1 being the wire closest to the main power wire. Any help would be appreciated
Top