Toyota Tundra Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter · #1 ·
Has anyone put 325/65 r18 on the stick rims with a 3 inch level kit. If I just have to modify the skid plates that would be ok. I am just not sure about the factory rim offset and rubbing.
 

·
Registered
Joined
·
1,683 Posts
A 325 is way too wide a tire for the stock 8" wide wheel.
 

·
Premium Member
Joined
·
733 Posts
I have heard that 325 is max what a stock tundra will take w/o issues. But still I would not risk it and go that big.
 

·
Premium Member
Joined
·
2,247 Posts
I put a set of 305's on stock rims and they were ok!
 

·
The M.F.I.C.
Joined
·
3,762 Posts
I also have 305's on the stock 20's and they are fine
 

·
Mark it eight, Dude...
Joined
·
4,373 Posts
I have 305's on stock trd wheels, but even a 305 is supposed to be on a 8.5-11" wheel and the 325 is supposed to be on a 9-12" wheel. This is straight from BFG so I don't know what your tires would say exactly. I'm not trying to say not to do it just telling you the facts. I haven't noticed any wear on the center of the tire yet. With the 305's I have, i can barely squeeze my finger between the tire and the UCA.
 
1 - 7 of 7 Posts
Top