Toyota Tundra Forums banner

1 - 5 of 5 Posts

·
Premium Member
Joined
·
6,873 Posts
Discussion Starter #1
Anyone have access to the power steering box schematics for a 1993 pickup? Needing to see all the internal parts of the steering box. Rebuilding a box and want to make sure I have the kit and replace the correct o-rings, seals, etc.

Thanks in advance!
 

·
Retired Contributor
2010 Tundra/2015 4 Runner/2007 Prius
Joined
·
5,942 Posts
Please let me know how it goes.
I have never seen anyone able to rebuild one of these.
Even the SST's dont work on the teflon rings
Change the lower seals = Yes
Rebuild completley = NO

They usually either
A: leak when done
B: fail within 2 weeks
C: turn to far in 1 direction and not enough in the other

GOOD LUCK :D :tu: and be careful.
 

·
Premium Member
Joined
·
6,873 Posts
Discussion Starter #5
Please let me know how it goes.
I have never seen anyone able to rebuild one of these.
Even the SST's dont work on the teflon rings
Change the lower seals = Yes
Rebuild completley = NO

They usually either
A: leak when done
B: fail within 2 weeks
C: turn to far in 1 direction and not enough in the other

GOOD LUCK :D :tu: and be careful.
This site explains it pretty well: http://128.83.80.200/taco/box.html

Thanks! I'll be sure to take pics as I go.
 
1 - 5 of 5 Posts
Top