Toyota Tundra Forums banner

2000 4Runner Engine Ticking

1317 Views 1 Reply 2 Participants Last post by  Flashgordon
I have a 5 speed manual that has a ticking sound getting more noticeable. The sound completely goes away when I even slightly push in the clutch pedal. The clutch and timing chain were replaced about 5K ago. 156,000 and still going strong. Any ideas? Thanks.
1 - 2 of 2 Posts
Sounds to me like the throw-out bearing or bearing fork. See if you can get up there and carefully spray a lithum based grease around the fork where it attaches to the housing. Just be careful not to spray the clutch disc or pressure plate.
Good luck! :tu:
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top