2003 Tundra 4.7l 4x4 need install instruction for Valve assembly vacuum switch
Join the discussion
Recommended Reading
-
2004 V8 4.7 Tundra code 0340 Camshaft position sensor A
Intake and ExhaustI barely made my first turn coming out of my driveway when my 04 Tundra it completely shut off. Battery light came on and the check engine light came on as well.I attempted to start it and it sounded like it was attempting to turn over but the engine will not engage. Even after I let go of the...- 4
- 275
-
Cost of installation
Intake and ExhaustSo I bought a new OEM exhaust system from my local Toyota dealer. Cats and everything behind. All new hardware, hangers etc. I dropped the truck off at a local Muffler Shop and asked the guy to complete the install. picked it up later that day and was told the cost would be $600.00 Which was...- 4
- 205
-
2004 Tundra V8 DC 4WD Front Pipe Fitment
Intake and ExhaustI have a 2004 Tundra V8 DC 4WD and I need both front pipes / cats. I found a 2004 Tundra V8 DC TWO WHEEL DRIVE that has the parts but was told that they are not interchangeable with a 4WD. Can anyone please let me know if this is true of are they exchangeable. thanks- 0
- 182
-
Help bring back the AMSOIL EAA237 dry Air Filter!
Intake and Exhaust*********UPDATE 9/28/2014 Amsoil is discontinuing the entire Ea Air Filter line for the following reasons: "The air filter business has changed dramatically over the past 10-15 years. Vehicle manufacturers continually pack increasingly more under the hood, making the air induction system more...- 63
- 10K
-
Tundradrenalin · updated
-
2001 SR5 4.7 2WD misfires
Intake and ExhaustHelp! My tundra misfires between 3400-4000 rpm, both in park and while driving. I have replaced the fuel pump and filter, replaced the coils, and cleaned the injectors. I'm open to new ideas.- 0
- 205
-
Burkenhare · updated
Join now to ask and comment!