Toyota Tundra Forums banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
13,116 Posts
So, here's my questions:

1) If I run 285/70R17 Revos on stock wheels, will All Pro's 1.5" wheel adapters provide enough clearance from the upper a-arm?
That is very similar to the arrangment I have, and yes the adapters should provide enough clearance.

2) Can the 285's be run without the wheel adapters and clear the upper a-arm or is the extra width definitely needed?
You will definitely need the adapters with stock wheels. On mine, the tires will touch the UCA even at a standstill unless you install the adapters.

3) If running this setup with the above lift setup, will I need to trim the front fenders or mud flaps at all. If so, where is this needed?
I did not need to trim my fenders, and I have zero rubbing. See my pics for what it looks like.
 

·
Premium Member
Joined
·
13,116 Posts
Thanks for the help. I wonder if there's a difference between a 2001 and a 2006? Are you running 1.5" wheel adapters or something a little different? Do you have a leveling kit and the 3" body lift? Sorry, just need to make sure everything's the same when this crap costs so much money. :)

Chris
Read my sig. It tells you everything I have. And I have 1.5" adapters.
 

·
Premium Member
Joined
·
13,116 Posts
I read that, but I don't know how much lift is provided by that setup. That's why I asked. Thanks for the help,

Chris
I got about 2.5 - 3 inches of lift in the front with the Bilstein Adjustable shocks.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top