Toyota Tundra Forums banner
1 - 2 of 2 Posts

·
Registered
14’ Sequoia Limited
Joined
·
278 Posts
I have Dobinsons 1.75” springs/shocks in the rear of my 14’ and they are amazing! I have Bilstein 6112’s in front and again, great shocks! Less squat from acceleration, less roll, more planted feel to the truck. I would definitely do a real suspension set up and pass on the spacers. I went through months of research and at one point had a ReadyLift kit at my house but returned it. Read this thread:

 

·
Registered
14’ Sequoia Limited
Joined
·
278 Posts
Thanks for the input friends - I am on the way slowly. I put the 1" Trail Gear spacers on last week and I really like how they put the 275/70 DuraTracs right at the fender. I was able to locate a set of 1.75" Dobinsons rear coils to go with my 5100s and hoping to get everything installed in a week or two. Looking closely at Farnsrocket's build and a few others I think I will set the Billys at the middle clip on the front (1.87" lift I believe) leaving a bit of rake. Here is a photo of the new to me wheels/tires/spacers.
Here's my install thread

 
1 - 2 of 2 Posts
Top