Toyota Tundra Forums banner
1 - 10 of 10 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I am looking for a diagram for driver side mirror. Someone hit that mirror and the glass and the back plate popped out. It want go back on and I am wondering if there is a part that broke off and feel off that want allow it to hook back on.
 

· Registered
Joined
·
4,252 Posts
Youtube any Toyota mirror disassembly. They are all made the same way so you dont need to find one specific to your truck.
 

· Registered
Joined
·
7 Posts
If you don’t get it figured out, I have a set of mirrors off my 2016 DC SR5 TRD that I took off to put the trail ridge towing mirrors on. They’ve got all the bells and whistles (BSM light, heated, full power).
 

· Registered
Joined
·
4,252 Posts
What do you mean when you say the back plate? Do you mean just the exterior cover or something else? Maybe take a pic and post it here. That might help others offer up some suggestions.

 

· Registered
Joined
·
7 Posts
How much for the mirrors? I don't have BSM on my truck so don't know if that would work.
Uh. How about $100 for both sides? Including shipping. They’re like new.

The BSM won’t work because you need the sensors in the body. But the heated part could be achieved with a dash switch, if you didn’t have that.


Sent from my iPhone using Tapatalk
 

· Registered
Joined
·
4,252 Posts
Duckman- You would be a fool not to pounce all over Bill's offer. $100 delivered right to your door for a pair of OEM mirrors? How do you get any better than that?
 

· Registered
Joined
·
4 Posts
Discussion Starter · #9 ·
Uh. How about $100 for both sides? Including shipping. They’re like new.

The BSM won’t work because you need the sensors in the body. But the heated part could be achieved with a dash switch, if you didn’t have that.


Sent from my iPhone using Tapatalk

Man that is one heck of deal. How to you want me to send you payment for them?
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top