Toyota Tundra Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Can anyone tell me how they removed their exhaust manifold? I am having difficulty in gaining access to the middle 2 nuts on the bottom of the manifold on each side. The are over the middle support and under the manifold and I have not been able to get a wrench or socket on them?

I am an amateur mechanic and a newbie on this list. I see that several of you have managed to accomplish this and would appreciate any suggestions you might have.
Thanks,
 

·
Premium Member
Joined
·
373 Posts
I took a deepwell socket and cut it in about half, used that plus a universal joint and a bunch of extensions going through the wheelwell. Other's have also jacked up the engine and removed the motor mount to access the nuts.
 

·
Premium Member
Joined
·
182 Posts
I jacked up the engine a bit and removed the motor mount. Put a piece of wood on the oil pan and avoid the drain plug. Do one side at a time.
 

·
Registered
Joined
·
1,745 Posts
Search through the header threads,most people have posted tips and tricks on removal of their OEM manifolds.
 
1 - 5 of 5 Posts
Top