Toyota Tundra Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
67 Posts
Its real easy to do. A bit awkward by yourself but certainly achieveable. The boards mount to the body (not the rails like I thought they may have). The bolts have loctite on them so you dont need to really crank them down. About as easy a project as you can get.

The down side is thet aside from protecting your paint I find them fairly useless. They are tight to the truck so you just wind up getting in and out around the board instead of using it as a step. At least you will still have some paint left in the sides :) Good Luck
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top