Toyota Tundra Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
Hi,
First post so please bear with me. I have noticed many posts on stereo wiring harnessess and i think i'll add another. I have a 2000 with the factory 6 cd changer H/U. It will no longer play cds so i'm going to replace it. I am assuming i have the factory external amp so i know I'll need to remove it, my question is are there any "plug and play" harnesses? Or do they all require me to splice to the matching colors on the harness that comes with the new unit? I know i can order a H/U from a place like crutchfield but for the one I'm looking at an extra $300 for the wiring harness seems too high.
Thanks,
Jeff
 

·
Premium Member
Joined
·
2,875 Posts
Do you have the jbl system in your truck? If not then the scosche TA021 harness is what you need and most walmarts carry it. If you do get it make sure you wire all the illumination wires together. I just used one to install my eclipse avn5500 in my 06 dc and it made things so much easier. I did solder all of the wires together before I taped them to insure that they wouldn't come apart.
 
1 - 2 of 2 Posts
Top