I bought a pair of Bilstein 4600 rear shocks for my '08 Tundra, 4.7 V8 2WD.
According to Bilstein, these are the correct shocks, 24-186247, but I do not for the life of me see how these are going to work with the OE upper hardware. Except for the threaded portion, the rod is way too big for the OE hardware, and there's not nearly enough room for all if it.
Any advice?
According to Bilstein, these are the correct shocks, 24-186247, but I do not for the life of me see how these are going to work with the OE upper hardware. Except for the threaded portion, the rod is way too big for the OE hardware, and there's not nearly enough room for all if it.
Any advice?
