[nicholasdasti]

Got an 03 Sequoia, Looking for new front shocks since mine are shot. I'm looking for something with a 1.75 to 2 inch front lift just to level the front with the back height. I'm going to be running 31.7 inch tires. Any advice or ideas? Should I bother leveling it?

 

[jgrauman]

Bilstien 5100 adjustable struts if you are keeping all else stock. Can't go wrong

 

[donzigreg]

i second that on mt 2011 tundra i did it 4mo. ago middle setting perfect.

 

[silverbulletboyd]

Got an 03 Sequoia, Looking for new front shocks since mine are shot. I'm looking for something with a 1.75 to 2 inch front lift just to level the front with the back height. I'm going to be running 31.7 inch tires. Any advice or ideas? Should I bother leveling it?

I did my 2007 SR5 just that using Bilsteins 5100 front and back and leveled it evenly. Smooth ride!!

 

[Thriller]

If you are running stock rears, as mentioned....I’d go adjustable 5100’s on the front. I wanted as level as possible....and went 5100’s. This was over 3 years ago and it’s still perfect. I Set them to the second ring from the bottom for a .65" front lift. My goal all along was to keep it looking fairly stock with a modest lift. With the 5100's, my rake was under .75"...in other words, my rear now sits a little over half an inch or so higher higher than the front. This was exactly what I was looking for since my factory rake was 1.5 inches.
Here’s a pic of my 07....the first pic was the day I installed the 5100’s and the second is as it is today...they have held up nicely and it still looks/drives great.
Best,
Thriller

☝🏾The day I installed the 1500’s

☝🏾Two current pics a little over 3 years since I put the 1500’s on.

Got an 03 Sequoia, Looking for new front shocks since mine are shot. I'm looking for something with a 1.75 to 2 inch front lift just to level the front with the back height. I'm going to be running 31.7 inch tires. Any advice or ideas? Should I bother leveling it?

 

[James777]

I also recommend the Bilstien 5100's, installed them about a month ago on my 01 Tundra put on clip number 4, gave me a 2" Lift, reused the OEM Springs, very satisfied with the look and ride 👍🏻

 

[silverbulletboyd]

Got an 03 Sequoia, Looking for new front shocks since mine are shot. I'm looking for something with a 1.75 to 2 inch front lift just to level the front with the back height. I'm going to be running 31.7 inch tires. Any advice or ideas? Should I bother leveling it?

That's what I meant to say Bilsteins 1500.

 

[theillest]

@Thriller Thanks for the post. Looking to do the same on my 07. What size BFG AT did you go with?

 

[woodenfalcon]

Totally agree I used the 5100s all the way around on my 2003 sequoia and the ride is impeccable compared to before.

I would recommend changing the rack and pinion bushings also while your at it.

Sent from my SM-N950U using Tapatalk