Toyota Tundra Forums banner
1 - 3 of 3 Posts

· Just a Herbicidal maniac.
Joined
·
2,179 Posts
My 2001 Tundra with a Trenz billet grill upper and a T-Rex billet insert lower. You can just see a tiny bit of the lower insert in this pic. Most of it got covered up when I installed the winch. Oh well. I've had both for close to 8 years now.

 

· Just a Herbicidal maniac.
Joined
·
2,179 Posts
I would suggest searching in Google.com using these key words: tundra billet grill. You'll get quite a few 'hits'. Add in additional search words like 'Trenz' or 'T-Rex'. Then pick the one with the best price, etc. :tu: Good luck!
 

· Just a Herbicidal maniac.
Joined
·
2,179 Posts
Hey, Herbicidal, I found your upper grille online, and I was wondering, how did you adhere the toyota emblem to it, and where did you get the actual emblem? Also, since I'm a complete novice at this, how does the horizontal insert attach to our original outer bezel on the grille (cliff notes version)? Thanks-
I used heavy duty double sided tape that I got from Lowes or Home Depot. It was the original emblem, I just cut the tabs off the backside. I then laid the tape and trimmed with an X-acto knife. I've had it on there for years now and it has never come off. :tu:

Cliff notes version: It doesn't. You have to (very carefully) cut out the original with like a Dremel tool. Now there may be other brands out that attach directly to the outer, mine I had to cut to fit. I think that was my very first mod, like 8 or 9 years ago. :eek:
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top