[chargedtaco01]

Just curious what air pressure you're running? I've had mine at 35 psi all around and the fronts seem to be wearing a little on the outer edges. I'm going to do the chalk test but thought i'd ask to see if anybody might chime in.

 

[chargedtaco01]

I've had the tires for a couple months now and so far
they're great. I just want to make sure I have the
correct air pressure to make them last as long as possible.

I just bought these tires myself, should be here wed. so Im curious too.... what are your thoughts so far Chargedtaco??

 

[chargedtaco01]

Thanks for the input. Last night I bumped mine up to 40 but will be doing the chalk test as soon as I can. But I bet 38-40 psi will be about right.

I have mine for two years & have tried several different pressures. At the lower pressure I was getting some wear on the outer edges. I now run 38 & mine are fine.

 

[chargedtaco01]

I can only speak for myself but my truck came with the stock TRD alloys and BFG rugged trails so the factory specs on the door sill would only be for those tires. I upgraded to 20" wheels and tires so the psi settings are bound to be a little different.

And to answer popo2239's question, the zeons have great wet/dry traction. I haven't really had them offroad much other than a dirt road or two but on road, they've done very well. Night/day difference between the stockers my truck came with.

what about the factory spec. ??

 

[chargedtaco01]

Have you checked the air pressure and or alignment?

I don't know about anyone else but the dealer has been doing all the wheel work on my truck and the factory tires are almost gone on the sidewalls. I have about 29k on it and the inside wear is still good but what is the deal with the front end setup to make it do this. Don't want my next set to do the same thing.