Toyota Tundra Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
54 Posts
Discussion Starter #1
Well I just finished the clamp mod to my inner CV joints. Hopefully this stops the grease from slinging out. The right one was the only problem but I did both. I cut the old clamps off. I know some people have done it that way and some have just clamped over the old ones. To me this was the better way. So we'll see.
 

·
Premium Member
Joined
·
177 Posts
Well I just finished the clamp mod to my inner CV joints. Hopefully this stops the grease from slinging out. The right one was the only problem but I did both. I cut the old clamps off. I know some people have done it that way and some have just clamped over the old ones. To me this was the better way. So we'll see.
Installing new clamps on mine today.
 
1 - 2 of 2 Posts
Top