[Jcnunny]

Happy Thanksgiving everyone!

Hey here is my blinged out front end now.


I added the 6K DRL strip to the bottom, beneath the headlights. Had the trim part painted to match my 202 black,
I changed out the headlights for some aftermarket Anzo's with Halo's (after a marginal attempt at the BHLM).
.
And I changed my normal DRL's/turn signal lights to the V3 Triton 'switchbacks'. These are a high intensity 6k led bulbs that shine white instaed of amber while the car is on, but blink amber. By far my favorite upgrade with the lights.


So the all white pic is what it looks like driving down the road. The amber is me signaling to turn.


I'm thinking I may wire the halo's to only turn on when I turn on the headlights...I think I might be getting a little too flashy up front!


Thoughts?

 

[Jcnunny]

Thank you! They come as a kit. I had to put on an included sleeve and 4mm screws, and then it installs just like a normal bulb. It comes with ballasts that you have to mount near the headlights. They plug into the factory harness, but you do have to tap into one wire (low beam haedlight) so they dim when the headlights are on.

Here is the link from VLeds where I found them: Tundra V3 Triton White Amber Switchback DRL Turn Signals

 

[Jcnunny]

Thank you! I found an 'open box' set on ebay for $329. Best price I could find, and they were in perfect condition.