Toyota Tundra Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
184 Posts
your not suppose to adjust the cables. there is an adjustment star that you turn on the inside parking brake shoe (just like on a car with rear drums). you have to remove the rear tires and you will see a rubber plug on the rotor. remove it and with a flashlight look in the hole and turn the rotor until you see the adjustment star. its either on top or bottom. with a screw driver crank it up or down until it stops and the rotors is locked. back of about 2 cranks and make sure the rotors turn and your done. the cable adjustment is only if the cable gets stretch after using it alot.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top