Toyota Tundra Forums banner

1 - 4 of 4 Posts

·
Premium Member
Joined
·
8 Posts
Discussion Starter #1
Thinking of adding a camera system to your 2007+ Tundra? Take advantage of our August forum special by entering coupon code TUNDRASOLUTIONS20 and save 20%!! This coupon applies to any of our Camera Source exclusive OE Fit complete Tundra camera kits with or without the Gentex rear view mirror monitor.

All of our OE fit camera kits are plug and play[SUP]1[/SUP] with the factory wiring and use a factory Toyota tailgate handle for a true OE fit and finish. That means you can expect it to look and fit exactly like it would if you had ordered it from the factory with a rear view camera. Our camera utilizes our exclusive Super CMOS sensor, which will outperform the factory camera in color, clarity, and contrast!

Applicable configurations include:

2007-2009 OE fit camera kit with front flying lead[SUP][SUB]2[/SUB][/SUP] - or - Gentex 657 mirror - or - Gentex 335 compass mirror - or - Gentex 3345 compass/homelink mirror
2010-2013 OE fit camera kit with front flying lead[SUP][SUB]2[/SUB][/SUP] - or - Gentex 657 mirror - or - Gentex 335 compass mirror - or - Gentex 3345 compass/homelink mirror

See all the options here:
https://camera-source.com/products/...st-sale&utm_campaign=tundrasolutions-salepost

Sale not applicable to OEM replacement camera modules (CS-TUNOEM-MOD) or our budget drill through universal style Tundra camera kits (CS-10TUNK, CS-TUN-U, CS-TUNK-332).

Everything comes with a limited 3 year warranty so purchase with confidence, but hurry... this sale ends August 31st!

NOTES:
[SUP]1[/SUP] - Some 2012 and 2013 vehicles are not pre-wired from the factory. It is necessary to test the continuity from the 4 rear terminals to the connector above the overhead center console in the cab to ensure continuity before ordering. If you do not have continuity we can provide a complete harness so that you don't have to hunt for the missing wires.

[SUP]2[/SUP] - Our exclusive front flying lead allows you to tap into the factory harness with an RCA connector. This is useful for aftermarket head units that require an RCA style input for the rear camera allowing you the plug and play flexibility with your aftermarket receiver. In addition, this flying lead also incorporates a reverse trigger that relays power from your factory harness to your aftermarket receiver camera trigger wire making the installation extremely user friendly and simple!
 

·
Premium Member
Joined
·
8 Posts
Discussion Starter #2
This was a holiday sale from last December that we are bringing back during the month of August. Act now so you don't miss out on these special savings!
 

·
Registered
Joined
·
98 Posts
sounds like a decent kit, which one would i purchase as i have both home link and compass in my mirror?

lee
 

·
Registered
Joined
·
111 Posts
How about throwing in some free shipping too? :D
 
1 - 4 of 4 Posts
Top