Toyota Tundra Forums banner
1 - 1 of 1 Posts

1 Posts
After several tries I was able to program my Martin Garage Door to open with homelink. First reset by pressing first and third button till rapidly blinking. approx 20 sec.
I first tried the first button and the door opener but did not work. I tried it several times. Then I decided to try the middle button with the opener and that worked. I opened/closed several times and it works. I called Martin Garage Door and they said that if I wanted a tech to come out it would be $39 trip charge. That got me going to get it done myself.
In a website that I found regarding Martin Doors. This would only work with 315MHz controller.
Of course begin with installing fresh battery.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.