Toyota Tundra Forums banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
Had weird issue happen when I was doing a mod to my Sequoia. Added a couple of LED lights to my rear bumper for lighting boat ramps at night when trailering a boat. Tapped into power and ground from my rear tail lights. For some reason now my front fogs, tag light and parking break lights stopped working. I’ve checked fuses, relays and disconnected negative on battery to reset ECM. I’ve disconnected the LEDs and tested with a 12v source and they work fine. Nothing so far has helped. Found old posts about similar issues. Only one person who fixed it replacing a couple fuses. Curious if anyone else has ran into this and how they fixed it. Thanks for any help!
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.