[Blue06Tundra]

I bought a used 2006 Tundra SR5 Double Cab last weekend and it didn't have any of the keyless remotes with it. I purchased one on Ebay (made sure I got the right version for the DC based on the manual) and I can't get it to program. I can't even get the Tundra to enter programming mode. I am following the directions from www.programyourremote.com. I did it several times and nothing. The remote is in excellent condition and has a new battery. Thanks in advance for your help.

 

[Tundradrenalin]

Check the Sticky posts at the top of the forum called http://www.tundrasolutions.com/forums/1gen-tundra/123989-diy-do-it-yourself-user-knowledgebase/. About half way down there is a section called Member Install Guides, click on the link for the PDF file with the words RS3200 in it.

That should help.

 

[Blue06Tundra]

Thanks very much. I printed out the PDF document you suggested and have reviewed it. However, I don't have a security system. Will this process still work and do I just ignore the fact that my Tundra is not going to activate lights and buzzer when going through the process? I also noticed that in the notes section on this document is says, "For factory remote keyless entry system programming information, refer to the vehicle repair manual." Is that what I need? And, if so, where can I find that? Thanks again, I know this keyless entry stuff can be tedious and annoying!

 

[Tundradrenalin]

click this link ---------> Keyless Remote Programming Guide <--------click this link

Follow the instructions in that PDF document and you should be beeping and chirping like new. :tu:

 

[diablito1975]

I bought a used 2006 Tundra SR5 Double Cab last weekend and it didn't have any of the keyless remotes with it. I purchased one on Ebay (made sure I got the right version for the DC based on the manual) and I can't get it to program. I can't even get the Tundra to enter programming mode. I am following the directions from www.programyourremote.com. I did it several times and nothing. The remote is in excellent condition and has a new battery. Thanks in advance for your help.

hi, try this it worked for my 05 double cab limited

 

[Blue06Tundra]

TundraSolutions.com - Didn't work. Tried it over and over. Do all 2006 DC Tundras beep and chirp? Didn't know this...happy with just the good ol' keyless entry (lock-unlock feature) but if it suppossed to beep and chirp-excellent! Bought it used from a dealer and no information. Upgrading from a 1995 4Runner. Will try diablito1975 's suggestion tomorrow and let you know. Would really like this to work! Thanks for all the suggestions.

 

[Tundradrenalin]

click this link ---------> Keyless Remote Programming Guide <--------click this link

Follow the instructions in that PDF document and you should be beeping and chirping like new. :tu:

try it again

 

[Blue06Tundra]

Still not working. Tried both .pdf recommendations several times today and had my husband try as well. Frustrated as hell. Any more tips?

 

[integraGSR]

it does get frustrating. i did it like 5 times then finally got it right! when you do get into the programming mode, make sure you use the rewrite, switch ignition on and off 2 times, so that any other remote that has been programmed before will not work and only the remote you have will work.

 

[diablito1975]

what is the fcc# on the back of the remote?

 

[integraGSR]

what is the fcc# on the back of the remote?

both the remotes needs to have the same FCC#.

 

[rpm2day]

My son just went through that with his 4Runner. Ended up going to a local stereo/alarm installer and 15 minutes and $15.00 later he's in business. No more frustration.

 

[chris.joyner1id]

Anybody come up with an answer on this one. I can't seem to get my 2006 Tundra into programming mode.

 

[DJ]

Anybody come up with an answer on this one. I can't seem to get my 2006 Tundra into programming mode.

Try Car and Truck Remotes. They sell fobs and they can help with programming.