Toyota Tundra Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have an 08 DC 4x4 with a level kit and want to fit some 305/60R20 but after reading hundreds of posts it sounds like I need a little more height in the front. Will the 5100s work in tandem with the front end spacer or is my front end already maxed out without doing a full lift kit with brackets? Any inexpensive suggestions?

I know I'll need to do some bending/trimming of the skid plate and prob remove the front mud flaps. Any other mods necessary?
 

·
Registered
Joined
·
7,461 Posts
well u dont use the 5100s and a lift spacer. thats a no no.

im pretty sure ive read and seen lots of people running a 305 tire with a lift/level kit (spacer lift) with minor trimming here and there w/no other issues.
 

·
Registered
Joined
·
4,495 Posts
Yea you should be fine with just a spacer by itself or the 5100's by themselves. Combining those two would cost significant $$$ in broken suspension parts.
 

·
Registered
Joined
·
1,438 Posts
I have an 08 DC 4x4 with a level kit and want to fit some 305/60R20 but after reading hundreds of posts it sounds like I need a little more height in the front. Will the 5100s work in tandem with the front end spacer or is my front end already maxed out without doing a full lift kit with brackets? Any inexpensive suggestions?

I know I'll need to do some bending/trimming of the skid plate and prob remove the front mud flaps. Any other mods necessary?
Don't forget about the diff drop kit and skid plate spacers....
 
1 - 5 of 5 Posts
Top