Toyota Tundra Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
57 Posts
Get some "Soft Scrub" kitchen cleanser and a red Scotchbrite pad, and clean it well. Rinse often and dry. The cleanser will remove any oils or silicones that will keep the primer/sealer/paint from adhering, and the red Scotchbrite scuffs the finish enough for it to adhere well.

If you are set on using sandpaper, then 400 grit wet on a rubber sanding block will work fine.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top