Toyota Tundra Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
387 Posts
Discussion Starter · #1 ·
Does anyone know how to remove the window switch/door lock switch panel piece from the door panel? Does it pop right out or is there a special way without damaging?
 

·
Registered
Joined
·
101 Posts
The panel should just pop out, it does on my 04 Tacoma.
 

·
Premium Member
Joined
·
1 Posts
I did this yesterday on an 04 Sequoia, the switch panel had clips at the front and back of long axis of the panel. I slid a very thin flat blade screw driver in from the back, slight prying up while pushing forward and the panel poped right out. A small putty knife might be safer but I managed to not scratch the panel.
 

·
Registered
Joined
·
387 Posts
Discussion Starter · #4 ·
thanks guys!
 

·
Marine Veteran
Joined
·
826 Posts
Anyone know if the same is true for the new 07+ Tundra Panels? I tried mine to the point I really thought I was about to break it almost so obviously I stopped. Any help would be greatly appreciated.

Brad
 
1 - 5 of 5 Posts
Top