Toyota Tundra Forums banner
1 - 2 of 2 Posts

· Premium Member
Joined
·
200 Posts
Discussion Starter · #1 ·
Just attempted to replace the bulbs have a problem getting a grip on the bulbs and pulling them out with my big fingers. Any suggestions on gripping them without it breaking?
 

· Premium Member
Joined
·
200 Posts
Discussion Starter · #5 ·
Yeah!! Home Depot sells some soft clear polyethylene tubing in the plumbing dept. that is really flexibile. You'll need to find some that is the right size (maybe 3/8") and push it over the bulb. It will come right out.:tu:
The problem is you'll need about 2" of it and I think it comes in 10' lengths.:(
Thanks. I had a few feet of left over 1/2" ID polyethyelene tubing I used for A/C drainage. It worked great Rep points sent.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top