Joined
·
877 Posts
this is the cut out and mounting phase, the hole is cut just big enough for the back of the light to fit flush, the hole should be cut just big enough for the two mounting points to barely squeeze through, two hole the mirrow from the back side, i cut pieces of rubber tie downs straps, and glued them to the sides, works great. here are some pictures
Attachments
-
56.3 KB Views: 285
-
47.3 KB Views: 192
-
45 KB Views: 157
-
51.3 KB Views: 199
-
34.5 KB Views: 223