Toyota Tundra Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
163 Posts
Discussion Starter #1
sooo i have a little glitch, i turn my key "off" and my newly installed speakers Pop, and I hate it, and i know there is something to fix it, i just dont know what. SO, info is greatly apreciated.

amp is hooked up via RCA's directly from the stock HU (lo level) and the remote for the stock amp is now the remote for the new ones which is also from the stock HU
 

·
Premium Member
Joined
·
60 Posts
Check the amp ground.
Turn the gain down.
 

·
Registered
Joined
·
49 Posts
Turn off pops usually occur when the amp shuts down after the HU. Its possible that the aftermarket amp is taking longer to turn off after power is removed from the remote input compared to the original amp.
 

·
Registered
Joined
·
163 Posts
Discussion Starter #4
Note: the pop is not as loud if i turn the volume to 0 then turn the HU off before turning the key off, but ill check the ground, and the gain deffinetly is NOT too high, so....ill check defferent grounding pts. thanks guys

dont stop if you got somethin to add!!!
 

·
Registered
Joined
·
17 Posts
yah just do what he said check the grounds make sure the on the metal and not on the paint surface, just scratch the paint, if not your amp can be bad
 
1 - 5 of 5 Posts
Top