Toyota Tundra Forums banner

1 - 2 of 2 Posts

·
Premium Member
Joined
·
18 Posts
Discussion Starter #1
Hey guys I'm hoping someone out there has come across this issue and can lend some knowledge...:)

I connected the VSS wire from behind the "Combination Meter" (Green/Orange stripe) and confirmed I had continuity from connector-to-connector. The problem is the nav unit still doesn't show a signal, no "pulse's" and thus no speed reading in the diagnostic menu.

Has anyone run across this problem or have any suggestions? I've worn out the "search" button looking before I asked....:confused:

Thanks,
Keith
 

·
Premium Member
Joined
·
18 Posts
Discussion Starter #2
Problem solved.... I went into the diagnostic menu and cleared all the codes and now everything works!
 
1 - 2 of 2 Posts
Top