[meat_wrx]

I have a 2003 Sequoia Limited 4x4 ( I believe with towing package) and I bought a 2.5" lift/leveling kit off ebay. Link below. We installed the fronts no problem, when we attempted the rears, the Outer Diameter of my rear coils were the same as that of the spacers, so the spacers would not slip over top of the springs as intended. The OD of my rear springs is 7". According to the guys i bought the spacers from, the largest ID spacer they have is 6.5" and of course they had ever herd of my issue. They were cool and let me send the rears back for a refund, paying for shipping and all, so no complaints. But my question is, what spacer do I need to my rear? The ones i had were for FJ Cruiserm which are common sequoia fitment. But not this time. Thanks in advance!

2001 2007 Toyota Sequoia 2 5" Full Lift Leveling Kit Pro | eBay

 

[jakknz]

Is your spring diameter stock for a Sequoia? In other words, you have stock Sequoia coils right? If you do, I would reccommend this Toyota Sequoia 2" Rear Lift Level Spacer Kit 2001-2006. I bought them and installed them with no issues along with Bilstein 5100's up front. You can look at my past posts to see my truck. Where you at in VA?

 

[meat_wrx]

It's stock but apparently it's larger outer diameter then standard

 

[jakknz]

You want me to measure mine and let you know the outer diameter of the coil?

 

[meat_wrx]

Yea that would work, the OD of my rear spring is 7", so i need a coil spacer that has a 7" IN. The standard is 6.5