[Limited Element]

I have been looking around for tire and since I have the limited 20" wheels my selection is not so great. I found the tire I would like to get; However, the factory size replacement cost about $100 more per tire then the next larger size, 275/60R/20 (33). Will it fit or just rub every where? I would lift my truck, but I don't want to deal with all the alignment issues I have read about. Thanks in advance.

R,
Chris
2008 Tundra DC, Limited

 

[MaylonTRD]

275/60R20 >Search Tires
Section Width: 10.82 in 275 mm

Rim Diameter: 20 in 508 mm

Rim Width Range: 7.5 - 9.5 in

Overall Diameter: 32.99 in 837.94 mm

Sidewall Height: 6.49 in 164.84 mm

Radius: 16.49 in 418.84 mm

Circumference: 103.6 in 2631.4 mm

Revs per Mile: 630.4

I think it would fit. It's only a 33" tire. Try searching around. Here is some info. I think this is the thread where a guy says he has 305/65r18 with no lift which is about an inch taller and an inch wider than the ones you're looking at. Hope it helps
http://www.tundrasolutions.com/foru...-plate-body-35-inch/?highlight=skid+plate+cut