Toyota Tundra Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I need the pocket door that goes on top of the front center jump seat for a 2007-2013 Tundra. Here‘s a picture of where it’s missing to the left of the cupholders on my 2008 4x4 Tundra DC.
2ED8EB27-6D72-44EB-8DA8-77F714B59EFC.jpeg
 

·
Registered
Joined
·
3,672 Posts
Should be a 10 digit part number stamped on the part. Not saying you can see it from that pic but possible.
Not many Tundra's in my area but there were 4 in the local pick and pull scrap yard I went to about a year ago so check your area.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #4 ·
Should be a 10 digit part number stamped on the part. Not saying you can see it from that pic but possible.
Not many Tundra's in my area but there were 4 in the local pick and pull scrap yard I went to about a year ago so check your area.
I have a picture of the part but not the part to get a part number off of and according to two Toyota parts specialists, the part is not listed separately from the jump seat. I have a diagram of the jumpseat from the dealer’s part catalog and the part is not shown separately which makes no sense to me. So, I’ve been looking at scrap yards, online, etc for about 8 months. I don’t want to buy a jump seat just to get the cover.
 

·
Registered
Joined
·
3,672 Posts
Its probably a sub component of the whole assembly which is why they wont show you a separate number but there should be one, but yeah, it could be really difficult to find that number.
 
1 - 5 of 5 Posts
Top