Toyota Tundra Forums banner

2011 Tundra ABS failed now no 4X4

51 views 2 replies 2 participants last post by  Phil P  
#1 ·
Hello All

I am taking care of a fleet of Toyota 6 Tacoma and 1 Tundra.

We started purchasing Tacoma in 2008.

Now the problem is with the 2011 Tundra. The ABS control module has failed. This causes the 4 wheel drive to not work. There are no new ABS control module available. The few from the dismantling yards have not been any good either.

Is there any way to get the 4 wheel drive to work so I can use this on the ranch?

Phil P
 
#2 ·
Hey @Phil P, that’s a tough situation, having the failed ABS module on your 2011 Tundra take out the 4x4 system. Have you been able to pull the specific diagnostic codes it's throwing? Adding those codes might help someone here figure out a potential workaround for you.
 
#3 ·
Hi ForaFrank

C1241, C1332, C1333

Checked battery voltage found nothing wrong

Replace left rear speed sensor made no change still reporting open circuit.

Please be patent with me this is a 90 piece fleet of agriculture equipment so I am slow getting back to these types of problems.

Phil P